CellPave 38 – Interlocking Cellular Paving Grid

Interlocking Cellular Paving Grid System

CellPave 38 – Interlocking Cellular Paving Grid

CellPave™ 38 permeable paving grids are the ideal solution for parking areas, driveways and paths.


CellPave™ 38 is an interlocking cellular paving grid system for grass and ground reinforcement. Manufactured from 100% recycled HDPE plastic, CellPave™ 38 permeable grass & gravel plastic pavers are supplied per sq/m. CellPave™ 38 grass pavers are a cost effective solution to worn & rutted grassed areas, displaced gravel and for source control of surface water run-off. CellPave™ 38 paving grids are designed to be installed onto a well prepared, free-draining and relatively even surface using either a ‘Reduced-Dig System’ or by employing a full sub-base construction incorporating a geogrid reinforcement layer.


You can cut CellPave™ 38 grids easily with a common angle grinder or jigsaw. The grass reinforcement paver grids have a very open cell structure allowing unrestricted healthy grass root growth and water infiltration and can be used as part of a sustainable urban drainage system (SuDS). CellPave™ 38 pavers should be installed onto a firm level sub-base (typically a DoT Type 3 or porous sub-base). The thickness of this base is dependent on the existing ground conditions and the design load specifications. Please note that with all installations of grass pavers, it is strongly recommended that all areas should have sufficient drainage prior to installation. Failure to ensure this may result in the product not performing as intended.


• Parking Areas
• Access Roads
• Golf Courses
• Pedestrian Trails
• Embankments and shoreline reinforcement
• Erosion Protection


• Stable ground without puddles or mud
• Water can seep naturally
• Extremely simple and quick to install
• Hooks together easily with foot pressure
• Pre-assembled at 1.3m² (12 grids/layer)
• Anti-slip nodules on top/bottom
• UV Resistant and weatherproof
• Long service life

The CellPave™ 38 grid comes pre-assembled (12 grids per layer). This allows us to keep transport costs to a minimum and facilitate fast and easy installation. The grids can be separated as needed. White delineators are available for CellPave™ 38.
  • Tile Dimensions: 330mm x 330mm x 38mm
    Assembled Size on Pallet: 990mm x 990mm (3 x 3 tiles)
    Weight: 5.39kg per m²
    Pallet Dimensions: 1350mm x 1020mm x 2363mm / Contains 684 pavers / 57 layers (74.4m²) / Total pallet weight 434kg

Purchase CellPave 38






Volume discounts are available

Get a Purchase Quotation

 See HERE for sensible advice about Cellular Pavers